Showing 1513–1540 of 1838 results

  • Victron

    Victron AGM Deep Cycle Battery – 6V / 240Ah

    The AGM range has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches. 

    VRLA AGM: design life 7-10 years

  • Victron

    Victron AGM Super Cycle Battery – 12V / 170Ah (M8)

    The Victron Energy 12V 170Ah AGM Super Cycle battery has very low internal resistance making them particularly suitable for high current discharge applications such as for inverters, thrusters and winches.

  • Victron

    Victron ARGO Diode Battery Combiners BCD802

    Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

  • Victron

    Victron Argodiode 100-3AC 3 batteries Isolator

    Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

  • Victron

    Victron Argodiode 120-2AC 2 batteries 120A Retail

    Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

  • Victron

    Victron Argodiode 80-2AC 2 batteries 80A Isolator

    Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

  • Victron

    Victron Argodiode 80-2SC 2 batteries 80A Isolator

    Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

  • Victron

    Victron Argodiode Battery Isolator 140-3AC

    Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

  • Victron

    Victron Argofet 100-2 2 batteries 100A Isolator

    Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

    In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …

  • Victron

    Victron Argofet 100-3 3 batteries 100A Isolator

    Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

    In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …

  • Victron

    Victron Argofet 200-2 2 batteries 200A Isolator

    Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

    In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …

  • Victron

    Victron Argofet 200-3 3 batteries 200A Isolator

    Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.

    In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …

  • Victron

    Victron ASS030537010 VE.Bus Smart Dongle

    The Victron VE.Bus Smart dongle is a bluetooth accessory for Victron’s range of inverter/chargers. When installed, use the VictronConnect app to monitor operation and operate the system. It can also work as a Voltage and Temperature sensing device for the inverter/charger.

  • Victron

    Victron ASS030543020 GlobalLink 520 – 4G VE.Direct Device Monitor

    Victron believe that having insight into your installation is a key factor in maintaining and operating your off-grid energy solutions. Off-grid should not mean off-line, so they have created the GlobalLink 520. This device will bring 4G LTE-M connectivity to all VE.Direct enabled devices without any monthly fees or subscriptions, for the first five years.

  • Victron

    Victron ASS030550400 Skylla-i Remote On-Off Cable

    Use this cable to connect a Skylla-i to a VE.Bus BMS. The VE.Bus BMS will then disable the Skylla-i charger when the batteries are fully charged. This cable is intended for on/off control of the Skylla-i when the source signal is high when the Skylla-i must be on, and low or free floating when Skylla-i must be off.

  • Victron

    Victron Autotransformer 120/240v-32a

    Dimensions: 214mm x 110mm x 375mm.

    Weight: 10kg.

    Current: 32A.

  • Victron

    Victron Battery Balancer

    Dimensions (mm) 100 x 113 x 47.

    Weight: 0.4kg.

  • Victron

    Victron Battery Monitor BMV-700

    The BMV-700 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

     

  • Victron

    Victron Battery Monitor BMV-700H

    The BMV-700H is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  • Victron

    Victron Battery Monitor BMV-702

    The BMV-702 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  • Victron

    Victron Battery Monitor BMV-702 Black

    The BMV-702 is a high precision battery monitor. The essential function of a battery monitor is to calculate ampere hours consumed and the state of charge of a battery. Ampere hours consumed are calculated by integrating the current flowing in or out of the battery.

  • Victron

    Victron Battery Protect 12/24v – 220A

    Maximum continuous load current: 220A.

    Peak current: 600A.

    Operating voltage range: 6 –35 V.

    Current consumption: 1.5mA when on / 0.6mA when off or low voltage shutdown.

    Alarm output delay: 12 seconds.

    Load disconnect delay / Load reconnect delay: 90 minutes (immediate if triggered by the VE.Bus BMS) / 30 seconds.

    Default threshold – …

  • Victron

    Victron Battery Protect 12/24v – 65A

    Maximum continuous load current: 65A.

    Peak current: 300A.

    Operating voltage range: 6 –35 V.

    Current consumption: 1.5mA when on / 0.6mA when off or low voltage shutdown.

    Alarm output delay: 12 seconds.

    Load disconnect delay / Load reconnect delay: 90 minutes (immediate if triggered by the VE.Bus BMS) / 30 seconds.

    Default threshold – …

  • Victron

    Victron Battery Protect 12/24V-100A

    The BatteryProtect disconnects the battery from non essential loads before it is completely discharged (which would damage the battery) or before it has insufficient power left to crank the engine.

  • Victron

    Victron BCD000402000 Diode Battery Combiner BCD 402

    Diode Battery Combiners are used to guarantee continuous DC power to mission critical equipment, such as an electronic engine control system. With a diode battery combiner two or more DC power sources can be used in parallel to supply the mission critical load. Failure of one source will not interrupt power to the critical load.

  • Victron

    Victron Blue Smart IP22 12/20 (3)230V Uk

    The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

    All IP22 Chargers require a 230 V AC connection.

    Click here for more information on …

  • Victron

    Victron Blue Smart IP22 Charger 12/15 (1)230v Cee 7/7

    The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

    All IP22 Chargers require a 230 V AC connection.

    Click here for more information on …

  • Victron

    Victron Blue Smart IP22 Charger 12/15 (3) UK

    The Blue Smart IP22 Charger is the new professional battery charger with built-in bluetooth. The Blue Smart IP22 Charger can be used on devices in your workshop and on motor vehicles, such as (classic) cars; motorbikes; boats and camper-vans.

    All IP22 Chargers require a 230 V AC connection.

    Click here for more information on …