£81.60
Victron Energy MK2 interface module to connect PC to Phoenix. For use with v18 software and Phoenix chargers only.
Out of stock
Phoenix Inverters are ready to communicate with a computer through its RS-485 data port. All you need to link to your PC in order to be able to set and read out all parameters, is the data link as shown. Moreover, all Victron Energy products equipped with an RS-485 data port, such as VE.Net, can easily be integrated in a computerized monitoring and control system.
| Weight | 0.100000 kg |
|---|---|
| Dimensions | 14 × 14 × 4 cm |
Cont. AC power at 25 °C: 375 VA.
Cont. power at 25 °C / 40 °C: 300 / 260 W.
Peak power: 700 W.
Output AC voltage / frequency: 110VAC or 230VAC +/- 3%, 50Hz or 60Hz +/- 0,1%.
Input voltage range: 9,2 – 17 / 18,4 – 34,0 / 36,8 – 62,0V.
Low …
Panel is intended for remote on/off control of all the VE.Direct Phoenix inverter models.
VE.Direct cable is not included
Parallel and 3-phase operation.
Input voltage range (V DC) 9.5 – 17V / 19 – 33V / 38 – 66V.
Output voltage: 230 VAC ±2% Frequency: 50 Hz ± 0,1% (1).
Cont. output power at 25 ºC: 1600 VA / 1300 W.
VE.Bus communication port for parallel and three phase operation, remote monitoring and system integration.
…
Diode battery isolators allow simultaneous charging of two or more batteries from one alternator, without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.
Used to connect the BMV-600 series Battery Monitors to VE.Direct Enabled controllers
