Description
Charge voltage can be measured directly on the battery terminals in order to compensate for voltage loss due to cable resistance. An external sensor allows measuring battery temperature and compensating charge voltage accordingly.
Victron Skylla-TG 24v/50a(1+1) 3 Phase 400v Charger
£1,521.60
One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ.
Out of stock
Additional information
| Weight | 14.050000 kg |
|---|---|
| Dimensions | 33 × 33 × 46 cm |
Related products
VictronVictron VE.Direct Cable 3m
ASS030530230: Victron Ve Direct Cable 3M
The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.
- Victron
Victron VE.Direct to USB interface
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
- Victron
Victron Argofet 100-3 3 batteries 100A Isolator
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.
In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …
-
