Description
The EasySolar combines a MPPT Solar Charge Controller, an inverter/charger and AC distribution in one enclosure. The product is easy to install, with a minimum of wiring.
Victron EasySolar 48/5000/70-100 with Control panel
£3,226.80
Prioritizes battery charging by the MPPT charge controller.
Connects to the internet, enabling remote monitoring (VRM website) and remote control.
The AC distribution consists of a RCD (30mA / 63A) and four AC outputs protected by two 10A and two 16A circuit breakers. An additional 16A output is controlled by the AC input: it will switch on only when AC is available.
Unique PowerAssist technology protects the utility or generator supply from being overloaded by adding extra inverter power when needed.
Several software programs (Assistants) are available to configure the system for various grid interactive or stand-alone applications.
Out of stock
Additional information
| Weight | 38.000000 kg |
|---|---|
| Dimensions | 97 × 43 × 34 cm |
Related products
- Victron
Victron Argofet 100-2 2 batteries 100A Isolator
Similarly to diode battery isolators, FET isolators allow simultaneous charging of two or more batteries from one alternator (or a single output battery charger), without connecting the batteries together. Discharging the accessory battery for example will not result in also discharging the starter battery.
In contrast with diode battery isolators, FET isolators have virtually no voltage loss. Voltage drop …
- Victron
Victron VE.Direct to USB interface
The VE.Direct to USB interface connects products with a VE.Direct connection to devices with a USB port, for example a computer. With this cable it is also possible to connect more than two VE.Direct products to a single CCGX.
- Victron
Victron VE.CAN NMEA 2000 Cable
Use this cable to connect a Victron product with a VE.Can port to a NMEA2000 network.
