Description
- Drive Type: Type 1 (12V or 24V)
- Ram Capacity: 80cc – 230cc (4.9in3–14in3).
- Maximum Stall Pressure at 12V : 50bar (750psi).
- Peak Flow Rate (No Load): 1000cc/min (67in3/min).
- ACU Used: ACU-100
Raymarine Type 1 Autopilot Hydraulic Reversing Pump – 1L / 24VDC
£740.00
Raymarine Evolution pilots connect to hydraulic steering systems using a rugged hydraulic pump matched to the capacity of the hydraulic steering system.
If your system is hydraulic…
You’ll need to find out the size (in cc) of the hydraulic cylinder ram(s) mounted to the rudder or inboard engined boats, or to the drive unit on outboard engined boats. Your steering system documentation will have this information.
Autopilot Tip
If you cannot find the ram size on your steering system documentation, you can look on the cylinder ram itself for the brand and model number. Once you have the number use our hydraulic cylinder ram cross-reference guide to determine which hydraulic autopilot pump is compatible with your vessel’s hydraulic steering system.
Out of stock
Additional information
| Weight | 3.080000 kg |
|---|---|
| Dimensions | 24.8 × 11.3 × 9.6 cm |
Related products
RaymarineRaymarine i50 i60 Wind Speed Depth 3 Instrument 3 Transducer Pack
Raymarine i50 Speed, i50 Depth and i60 Wind Displays with P120 Speed/Tempreture Transducer, P319 Depth Transducers and Short Arm Wind Vane
- Raymarine
Raymarine i50 Speed Pack Retractable Speed Temp Thru Hull Transducer
Speed Through Water or Speed Over Ground (GPS required).
Sea surface temperature.
Trip and Log data.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
- Raymarine
Raymarine iTC-5 Instrument Transducer Converter
Easily convert Transducer signals to SeaTalkNG The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at …
- Raymarine
Raymarine i40 Speed Pack ST69 Speed/Temp Transom Mount Transducer
Shows current, maximum and average boat speed, log trip and sea temperature.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older Raymarine ST40 instrumentation.
