£125.00
The Raymarine NMEA2K STNG gateway cable kit is an all in one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system.
Out of stock
The Raymarine NMEA2K STNG gateway cable kit is an all in one kit to help integrate NMEA2000 components into your existing SeaTalkNG backbone system.
| Weight | 0.900000 kg |
|---|
SeaTalk ng Backbone cable – 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every …
SeaTalk ng Starter Kit – The SeaTalk ng Starter Kit is the perfect way to get started with your SeaTalk ng compatible Raymarine product. The 5-way connector forms the start of your SeaTalk ng backbone and your SeaTalk ng product is connected via a Spur Cable. What’s in the kit? A06064: SeaTalk ng 5-way Connector A06031: SeaTalk ng Backbone Terminator …
Raymarine’s proprietary network design released at the same time as NMEA0183 that had several key advantages. SeaTalk1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk1.
Used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network.
Depth trend indicator.
Minimum and maximum depth.
Audible shallow, anchor and deep water alarms.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Crystal clear depth readout.
Shallow and deep anchor alarms.
Minimum depth display.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older Raymarine ST40 instrumentation.
…
Includes 13.7m / 45ft cable.
Frequency: 200 KHZ .
Compatible hull material: metal & fiberglass.
Hole diameter for installation: 2″.
Compatible with ST60+, i50, ST70 / i70 (requires ST70 depth pod or ITC5 – sold separately).
Combines depth and speed data.
Easy to read 3-line display, dedicated depth and speed displays.
Trip/log, sea temperature and SOG.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.