£155.00
The Raymarine SeaTalkng Alarm Buzzer is a network accessory that repeats alarm and alert tones from compatible networked devices ensuring alarms and alerts can be heard on-deck and below decks as needed.
Out of stock
The powerful 100 dBm SeaTalkng Auxiliary Alarm Buzzer can repeat many different types of network alarms from connected Raymarine autopilot systems, instruments, AIS receivers and NMEA2000 engine monitoring systems. The compact, waterproof alarm buzzer connects easily to any empty spur connection on your boat’s SeaTalkng network.
The alarm module is powered by the network and works immediately – no setup or calibration is required.
| Weight | 0.230000 kg |
|---|---|
| Dimensions | 29.6 × 20.8 × 4.6 cm |
Speed, depth, log and sea temperature.
Two sets of data at once in large or small digits.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older …
Raymarine i50 Speed, i50 Depth and i60 Wind Displays with P120 Speed/Tempreture Transducer, P319 Depth Transducers and Short Arm Wind Vane
Dual element CHIRP transducer.
1.4º ultra-wide fan shaped beam for a wide view of DownVision images.
Second conical shaped beam for imaging fish targets.
Depth and temperature.
CPT-DVS cable length is 6m (19.7 ft.).
Depth trend indicator.
Minimum and maximum depth.
Audible shallow, anchor and deep water alarms.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.