£1,000.00
Evolution systems accommodate hydraulic, mechanical and power assisted stern drive systems. If you are not sure how to determine what type of steering system is installed on your vessel, please consult an authorised Raymarine dealer.
Out of stock
The Drive unit is the part that interfaces with your vessel’s steering system to keep you on the right course. Raymarine has a broad range of drive units to match almost any type of steering system. The stern drive is for use with inboard/outboard (I/O) vessels with power assisted steering.
Works with ACU-200 and SPX10 Course Computer.
| Weight | 2.520000 kg |
|---|---|
| Dimensions | 39.6 × 16.2 × 8.1 cm |
Designed for Type 1 Raymarine hydraulic, linear and rotary mechanical drives.
Delivers reliable autopilot drive power.
Provides power to the SeaTalkNG bus.
Connections for Rudder reference sensor, Sleep switch, Power, Drive motor, Drive clutch, Ground.
Raymarine Acu-100 Actuator Control Unit With the ACU-100 Raymarine brings the exceptional performance of Evolution Autopilots to sport boats, runabouts and smaller cruising yachts. Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor. As a true …
The stern drive is for use with inboard/outboard (I/O) vessels with power assisted steering.
The Raymarine EV-100 Tiller Drive is compact and unobtrusive, perfectly suitable for large tiller steered yachts up to 6,000kg (12,200 lbs) displacement. Used by some of the world’s top single-handed sailers.
Easily convert Transducer signals to SeaTalkNG The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at …
Speed, depth, log and sea temperature.
Two sets of data at once in large or small digits.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older …
Depth only transducer.
Compatible hull material: aluminium and fiberglass.
Cable 9m (30ft) cable with connector.
Hole diameter for installation: 2″.
Compatible hull material: aluminium and fiberglass.
Cable 9m (30ft) cable with connector.
Hole diameter for installation: 2″.
Compatible with ST60+, ST40, ST290, ST70 – requires ST70 depth pod (sold separately).