£30.00
This cable has an NMEA 2000 micro-C female connector on one end, to connect to the NMEA2000 device and a SeatalkNG white spur connector to plug into a T on the SeatalkNG backbone.
2 in stock
This cable has an NMEA 2000 micro-C female connector on one end, to connect to the NMEA2000 device and a SeatalkNG white spur connector to plug into a T on the SeatalkNG backbone.
For example, if you want to connect a LCJ Baroplug to a Raymarine system, this is what you would use.
| Weight | 0.020000 kg |
|---|---|
| Dimensions | 12.5 × 4.2 × 1.4 cm |
Depth/Temperature.
Bronze Thru-Hull transducer with fairing block.
Supplied with 10m cable.
Speed, depth, log and sea temperature.
Two sets of data at once in large or small digits.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older …
Depth trend indicator.
Minimum and maximum depth.
Audible shallow, anchor and deep water alarms.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Compatible hull material: aluminium and fiberglass.
Cable 9m (30ft) cable with connector.
Hole diameter for installation: 2″.
Compatible with ST60+, ST40, ST290, ST70 – requires ST70 depth pod (sold separately).