Raymarine RealVision 3D Transducer Extension Cable - 5m

Raymarine RealVision 3D Transducer Extension Cable – 5m

£95.00

RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200, RV-300, & RV-400 series transducers.

1 in stock

SKU: 705-A80476 Category:

Description

  • Compatible with Raymarine RealVision Transducers
  • Length: 5m (16′)

RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200, RV-300, & RV-400 series transducers. Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at the transducer end. For best performance, Raymarine recommends using no more than two extension cables in any given cable run.

Note: The total length of cable between a transducer and the MFD should not exceed 18m.

Additional information

Weight0.730000 kg
Dimensions30.5 × 25.3 × 6.1 cm

You may also like…

  • Raymarine

    Raymarine RV-200 RealVision 3D Bronze Transducer – 0 degree

    Raymarine’s RV-200 Bronze All-In-One Through Hull Transducer is designed for inboard and outboard powerboats. The RV-200 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-200 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside.

    0° Element angle for Hull deadrises …

    £995.00

  • Raymarine

    Raymarine RV-100 RealVision 3D Transom Mount Transducer

    Raymarine’s RV-100 All-In-One Transom Mount Transducer lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D sonar. The RV-100 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, high frequency CHIRP fish targeting and RealVision 3D™ sonar inside.

    £420.00

  • Raymarine

    Raymarine RV-300 RealVision 3D Thru-Hull Plastic Transducer – 0 Degree

    Designed for inboard or outboard boats, the RV-300 Plastic Through Hull Transducer lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar.

    0° Element angle for Hull deadrises between 0° – 5°

    £795.00

  • Raymarine

    Raymarine RV-400 RealVision 3D Thru-Hull S-Steel Transducer – 0 Degree

    Raymarine’s RV-400 stainless steel all-in-one through hull transducer is designed for inboard and outboard powerboats. The RV-400 lets you easily identify structures and locate fish with the life-like clarity of RealVision 3D™ sonar. The RV-400 is a 4-channel, Wide Spectrum CHIRP transducer with DownVision™, SideVision™, conical CHIRP fish targeting and RealVision 3D™ sonar inside.

    0° Element angle for Hull …

    £1,195.00

Related products

  • Raymarine

    Raymarine P17 Depth Thru Hull Retractable Transducer

    Compatible hull material: aluminium and fiberglass.

    Hole diameter for installation: 2″.

    Cable 13.7m (45ft) cable with connector.

    Depth only transducer.

    £135.00

  • Raymarine

    Raymarine i50 Depth Pack with P319 Depth Thru Hull Transducer

    Depth trend indicator.

    Minimum and maximum depth.

    Audible shallow, anchor and deep water alarms.

    Large numerals and digits.

    Red back lighting for enhanced night time visibility.

    SeaTalk and SeaTalkNG interfaces.

    NMEA 2000 (compatible) interface.

    Built-in transducer interface.

    110mm x 115mm footprint.

    Low power consumption.

    £550.00

  • Raymarine

    Raymarine i50 Tridata Pack Speed Temp Depth Thru Hull Transducers

    Combines depth and speed data.

    Easy to read 3-line display, dedicated depth and speed displays.

    Trip/log, sea temperature and SOG.

    Large numerals and digits.

    Red back lighting for enhanced night time visibility.

    SeaTalk and SeaTalkNG interfaces.

    NMEA 2000 (compatible) interface.

    Built-in transducer interface.

    110mm x 115mm footprint.

    Low power consumption.

    £790.00

  • Raymarine

    Raymarine iTC-5 Instrument Transducer Converter

    Easily convert Transducer signals to SeaTalkNG The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at …

    £280.00