Description
The RayMic 15m extension cable is used to connect a RayMic to a Ray60 or Ray70 VHF marine radio.
£135.00
The RayMic 15m extension cable is used to connect a RayMic to a Ray60 or Ray70 VHF marine radio.
1 in stock
The RayMic 15m extension cable is used to connect a RayMic to a Ray60 or Ray70 VHF marine radio.
Weight | 0.970000 kg |
---|---|
Dimensions | 24 × 23.5 × 5.1 cm |
Compatible hull material: aluminium and fiberglass.
Cable 9m (30ft) cable with connector.
Hole diameter for installation: 2″.
Compatible with ST60+, ST40, ST290, ST70 – requires ST70 depth pod (sold separately).
Speed Through Water or Speed Over Ground (GPS required).
Sea surface temperature.
Trip and Log data.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Crystal clear depth readout.
Shallow and deep anchor alarms.
Minimum depth display.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older Raymarine ST40 instrumentation.
…
Apparent wind speed and direction and true wind speed and direction.
Talks to your autopilot to steer your boat to a selected apparent wind angle.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in …