Raymarine iTC-5 Instrument Transducer Converter

£280.00

Easily convert Transducer signals to SeaTalkNG The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone. Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass). If you don’t have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers.

2 in stock

SKU: 705-E70010 Category:

Description

Easily convert Transducer signals to SeaTalkNG.

The Raymarine iTC-5 converts analogue transducer signals used in i70, ST70+ and ST70 instrument systems to SeaTalkNG. Transducers for Speed/Temperature, Depth, Wind, Rudder Angle and Fluxgate Compass can be connected to the one iTC-5 unit, eliminating the need for multiple ST70 pods. Extended STng systems can support multiple iTC-5 units. SeaTalkNG connections at the base of the unit simply connect the iTC-5 unit into the SeaTalkNG backbone.

Please note the ST40/i40/i50/i60 and ST60+ displays cannot calibrate the iTC-5. Only the i70 has full transducer calibration. The ST70/ST70+ can calibrate the Depth, Wind and Speed/Temp transducers (not Rudder or Compass). If you don’t have an ST70/ST70+ or i70 in your system, then the ST40/i40/i50/i60/ST60+ displays must be interfaced directly to the relevant analogue transducers.

Additional information

Weight0.580000 kg
Dimensions22.9 × 15.9 × 6.4 cm

You may also like…

  • Raymarine

    Raymarine VHF NMEA0183 TO STNG Converter Kit

    Used for connecting an Isolated NMEA0183 VHF to the SeaTalkng network.

    £120.00

  • Raymarine

    Raymarine ST1 to STNG Adaptor Kit

    SEATALK 1 to SeaTalkNG Converter Kit The SEATALK 1 to SeaTalkNG converter allows select SeaTalk 1 devices to interface and communicate on the Raymarine SeaTalkNG data network. It is compatible with legacy ST40, ST60+, Raystar 125 GPS sensors and LifeTag Wireless Man Overboard Systems. The SeaTalk to SeaTalkNG Converter kit is a compact solution that connects in-line with the …

    £120.00

  • Raymarine

    Raymarine STNG Backbone Kit

    SeaTalkNG is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s a wide range of cable lengths, all with over-moulded plugs, so there is no need to …

    £260.00

  • Raymarine

    Raymarine ST1 to STNG Convertor only

    Raymarine’s proprietary network design released at the same time as NMEA0183 that had several key advantages. SeaTalk1 is included in many Raymarine MFDs and instruments to provide legacy support but now NMEA 2000 offers several advantages over SeaTalk1.

    £100.00

Related products

  • Raymarine

    Raymarine i40 Depth Pack with P7 Depth Thru Hull Transducer

    Crystal clear depth readout.

    Shallow and deep anchor alarms.

    Minimum depth display.

    Red backlighting for improved visibility.

    Large controls for ease of use at sea.

    Low power consumption for increased battery life.

    SeaTalk interface (SeaTalkNG when used with SeaTalk converter).

    Built-in transducer interface.

    Same footprint as the older Raymarine ST40 instrumentation.

    …

    £315.00

  • Raymarine

    Raymarine i40 Bi-Data Pack Speed Temp P7 Depth Thru Hull Transducers

    Speed, depth, log and sea temperature.

    Two sets of data at once in large or small digits.

    Red backlighting for improved visibility.

    Large controls for ease of use at sea.

    Low power consumption for increased battery life.

    SeaTalk interface (SeaTalkNG when used with SeaTalk converter).

    Built-in transducer interface.

    Same footprint as the older …

    £420.00

  • Raymarine

    Raymarine P319 Low Profile Thru Hull Depth Transducer 14m Cable

    Includes 13.7m / 45ft cable.

    Frequency: 200 KHZ .

    Compatible hull material: metal & fiberglass.

    Hole diameter for installation: 2″.

    Compatible with ST60+, i50, ST70 / i70 (requires ST70 depth pod or ITC5 – sold separately).

    £110.00

  • Raymarine

    Raymarine i40 Speed Pack with P371 Speed Temp Thru Hull Transducer

    Specifically designed to complement Raymarine’s unique wheel-drive and tiller-drive applications, the ACU-100 provides a powerful and secure interface between steering systems and the revolutionary EV-1 course computer and 9-axis sensor.

    £315.00