£525.00
The AR200 is an Augmented Reality Sensor consisting of a Global Navigation Satellite Systems (GNSS) Receiver and an Attitude and Heading Reference System (AHRS) sensor.
Out of stock
In The Box
Mounting Trip (top)
Small sealing ring
AR200
3 x large bulkhead bracket fixings (pan head pozi DIN7981-ST 3.9×22 C Z A4 Stainless steel)
Mounting tray (bottom)
4 x small surface mount fixings (pan head pozi DIN7981-ST 2.9×13 C Z A4 Stainless steel)
Bulkhead (wall) bracket
Large sealing ring
Documentation
6m (19.7ft) SeaTalkNG white cable
| Weight | 0.920000 kg |
|---|---|
| Dimensions | 30.7 × 19.2 × 11.1 cm |
SeaTalk ng Power cable – A cable to connect a SeaTalk ng backbone to a 12V switched power supply. This provides power to the whole network and attached devices. Only one power cable is used per network. When attached at the mid-point of a network, this cable powers each half of the network independently. SeaTalk ng is …
SeaTalk ng Backbone cable – 9 m. In a SeaTalk ng installation, a backbone cable runs through the length of the boat. Individual devices connect to the backbone by spur cables that run to T-pieces on the backbone. The backbone carries both data and power to attached devices. The backbone should be sized so that it will run past every …
SeaTalk ng Terminator – Fitted at each end of backbone, two are required per system. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout the system to make installation easier. There’s …
SeaTalk ng T-Piece – Connects spur to backbone. Used for connecting white SeaTalk ng Spur Cables to Blue SeaTalk ng Backbone Cables. SeaTalk ng is a robust cabling and connection system compatible with NMEA 2000, built specifically for the marine environment comprising a powered single backbone with two terminators, one at each end. Small diameter cable connectors are used throughout …
Speed Through Water or Speed Over Ground (GPS required).
Sea surface temperature.
Trip and Log data.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Raymarine i50 Speed, i50 Depth and i60 Wind Displays with P120 Speed/Tempreture Transducer, P319 Depth Transducers and Short Arm Wind Vane
Speed, depth, log and sea temperature.
Two sets of data at once in large or small digits.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older …
Compatible hull material: metal, wood and fiberglass.
Dual frequency: 200/50 kHz.
10m (30ft) cable.
This model is speed, depth and temperature. .