£24.00
An encased automatic float switch that gives full automatic operation to any bilge pump. It is made of corrosion resistant and explosion proof materials with a casing to protect against accidental impacts and incorporates a reliable mechanical snap switch that has been tested to 500,000 on/off operations and activates at 2″ of water level.
Out of stock
An encased automatic float switch that gives full automatic operation to any bilge pump. It is made of corrosion resistant and explosion proof materials with a casing to protect against accidental impacts and incorporates a reliable mechanical snap switch that has been tested to 500,000 on/off operations and activates at 2″ of water level.
| Weight | 0.140000 kg |
|---|---|
| Dimensions | 12 × 7 × 7 cm |
Control panel with Auto, Off and Momentary On Switch for bilge pump activation. A warning light and audible alarm activates when there is water in the bilge and there is an accessable fuse holder from the front panel with an LED power indicator.
This extra flat automatic float switch gives full automatic operation to any bilge pump. It is made of corrosion resistant and explosion proof materials and incorporates a reliable mechanical snap switch that has been tested to 500,000 on/off operations and activates at 2″ of water level.
Heavy duty float switch activates when water level reaches 2″. Technopolymer body for use with 12/24V bilge pumps drawing up to 20 Amps.
Extremely compact in size the Europump Next Generation is a submersible bilge pump with backflow check valve and removable hose connector which is adjustable at 360 degrees.
Copper contacts, stainless steel springs, polycarbonate body, and fitted with automatic power interruption on the alternator if the battery isolator activates before turning off the engine. Specially suited for diesel engines which, due to large starters, require heavy amperage.
Made of black technopolymer with flange fixing. Equipped with watertight cap and copper contacts.
Made of stainless steel and aluminium this mounting bracket is for surface mounting installation. The light can be removed thanks to the fixing system with plastic-grip knob.
12/24V 100A Dual battery switch. Switch between: Off, Battery 1, Battery 2, Battery 1&2.