£60.00
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with fluid levels all the way to the top of the tank, and eliminating the 2″ deadband of the TLM100/TLM150.
Out of stock
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with fluid levels all the way to the top of the tank, and eliminating the 2″ deadband of the TLM100/TLM150.
| Weight | 1.520000 kg |
|---|---|
| Dimensions | 110 × 7 × 7 cm |
Maretron’s TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no …
Maretron’s TLM150 is used to sense gasoline fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM150 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no …
Maretron’s TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult …
Monitors and reports the running statuses of six independently connected devices.
Can detect and report problems like opens and shorts in switch circuits.
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection.
Termination resistors are used to terminate both ends of the trunk line.
