£295.20
RAA100 – NMEA 2000 Rudder Angle Adapter The RAA100 is used to adapt commercially available resistive rudder angle senders to the NMEA 2000® network. This allows you to observe rudder angle anywhere on the vessel where there is an NMEA 2000 compatible display such as Maretron’s N2KView vessel monitoring system, or Maretron’s DSM150/DSM250 colour graphics displays.
1 in stock
The RAA100 is compatible with both the American standard (240-33 ohm) and the European standard (10-180 ohm) resistive senders. In fact, the RAA100 can be calibrated for any resistance between 0 and 300 ohms. You can also use the RAA100 with existing analogue gauges so you don’t have to give up your existing analogue gauges to enjoy the advantages of digitally networked information.
| Weight | 0.410000 kg |
|---|---|
| Dimensions | 25 × 18 × 5 cm |
Performance Analysis.
Vessel Tracking.
Preventative Maintenance.
Warranty Incident.
Accident Investigation.
The TSM810C is an 8” dedicated touchscreen that includes Maretron’s N2KView® vessel monitoring and control software. The N2KView® software allows you to configure as many favorite screens as you want with exactly the information you want to see. The TSM810C provides an extremely simple touch interface for monitoring and controlling critical systems from anywhere on the vessel.
Maretron’s DSM410 is a 4.1” high-resolution sunlight viewable colour display that interprets and displays NMEA 2000® instrument, navigation, and vessel monitoring data. The DSM410 is a user friendly dedicated marine display with custom screen configurations and an easy-to-use five-key illuminated keypad. In addition to the monitoring and display capabilities, the DSM410 features an alert/alarm package and electrical switching capability. …
Exhaust Gas Temperature Probe (0°C to 900°C or 32° to 1652°F).
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection .
Termination resistors are used to terminate both ends of the trunk line.
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …