£40.20
Corrosion resistant Nickel plated Brass .
Weatherproof to IP67 .
Reduces Mini Backbone to Micro/Mid Cable.
3 in stock
The reducer is used to change from a Mini cable to Micro or Mid cable. For example, one end of the network might be terminated at the top of the mast but it may not be desirable to run a Mini trunk cable up the mast. In this case, you can switch over to Micro or Mid cable at the base of the mast using the reducer and continue up the mast with Micro or Mid cable.
| Weight | 0.090000 kg |
|---|---|
| Dimensions | 13 × 10 × 7 cm |
Immersion Probe for Tanks or Plenums (-20°C to 80°C or -4°F to 176°F).
Maretron’s TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult …
1.25” BSP Non-Displacement Hull Focus Tube.
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …