£46.80
Yellow cable indicates power and can’t be confused with gray network cable.
Two cable lengths to match installation requirements.
Voltage Rating: 250 V .
Max Amperage: 4.0 Amps.
Out of stock
A Powertap Tee is connected to a network backbone just like any Tee but rather than connecting a device their purpose is to provide “bus” power. Maretron Powertap Tee uniquely provides two power inputs permitting doubled power provision for devices. .
| Weight | 0.430000 kg |
|---|---|
| Dimensions | 29 × 21 × 5 cm |
Maretron’s USB100 is a gateway for bridging computers to an NMEA network. This allows you to use PC based vessel monitoring and control software like Maretron’s N2KView® or PC based navigation software. The gateway provides one simple connection between the network and the PC, which eliminates conventional multiplexers and the maze of wires usually associated with interfacing equipment to PCs.
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …
Performance Analysis.
Vessel Tracking.
Preventative Maintenance.
Warranty Incident.
Accident Investigation.
Maretron’s TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no …