£198.60
The IRHT-01 is used in conjunction with Maretron’s Current Loop Monitor (CLM100), which allows indoor humidity and temperature to be broadcast over an NMEA 2000® network where it can be monitored from any compatible NMEA 2000 display.
Out of stock
When used together with a Maretron displays, alerts can be set so the user can be informed of abnormal or detrimental conditions. And when not onboard the vessel, users can be notified through emails or text messages. Additionally, the relative humidity and temperature can be stored using Maretron’s data recorder (VDR100) for later analysis.
| Weight | 0.270000 kg |
|---|---|
| Dimensions | 30 × 23 × 5 cm |
Maretron’s CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on compatible NMEA 2000® displays.
Performance Analysis.
Vessel Tracking.
Preventative Maintenance.
Warranty Incident.
Accident Investigation.
1.25” BSP Non-Displacement Hull Focus Tube.
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …
Maretron’s TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult …
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection.
Termination resistors are used to terminate both ends of the trunk line.