Description
Accessory for Maretron 40”Depth Tank Level Monitor.
Maretron 1.5” NPT Non-Displacement Hull Focus Tube (TLM100 Accessory)
£39.60
Out of stock
You may also like…
MaretronMaretron 1.25”BSP Non Displacement Hull Tube TLM100 TLM150 Accessory
1.25” BSP Non-Displacement Hull Focus Tube.
-
- Maretron
Maretron Tank Level Monitor 40”Depth Tanks
Maretron’s TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no …
-
Related products
- Maretron
Maretron SAE 5-Bolt Pattern Non Displacement Hull Tube
SAE 5-Bolt Pattern Non-Displacement Hull Focus Tube.
- Maretron
Maretron Exhaust Gas Temperature Probe
Exhaust Gas Temperature Probe (0°C to 900°C or 32° to 1652°F).
- Maretron
Maretron Mini Termination Resistor
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection.
Termination resistors are used to terminate both ends of the trunk line.
- Maretron
Maretron SAE 5-Bolt Pattern Focus Tube with Dead Band Eliminator
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …
