Description
- Depth and temperature
- 235 kHz frequency prevents mutual interference with other echosounders on the vessel
- Depth performance from 500 mm (1.6′) to 183 m (600′)
- Retractable insert in plastic housing with a water valve
Garmin Airmar DT800 20′ Tilt NMEA 2000 Thru-Hull Transducer
£299.99
Garmin 010-11105-00 Airmar DT800 Smart Sensor 20 Degree
20′ Tilted version for 16′ – 24′ hull deadrise
The DT800 utilizes Airmar’s proven Tilted Element™ and broadband technologies in this thru-hull depth and temperature Smart™ Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® display or network. Airmar’s Smart™ Sensors have embedded microelectronics—the transducer element and signal processor are only millimeters apart. The signal from the depth transducer is processed right inside the sensor itself. All that is needed to receive depth and temperature data is a single cable into a compatible network or display.
Out of stock
Additional information
| Weight | 1.170000 kg |
|---|---|
| Dimensions | 9.3 × 7.7 × 3.5 cm |
You may also like…
GarminGarmin GDT 43 Depth & Tempreture Thru-Hull Transducer
This Thru-Hull Transducer can read water depth and temperature. It can retrofit an existing Nexus And Silva 43 mm Thru-Hull Transducer (TH43).
- Garmin
Garmin Airmar P19 12′ Tilt 8 Pin Thru-Hull Transducer
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.
- Garmin
Garmin Airmar P319 8 Pin Thru-Hull Transducer
When using with a 6-pin Garmin sounder, transducer adapter cable part number 010-11612-00 is required.
- Garmin
Garmin GT8HW-IH 8 Pin In Hull Transducer
GT8HW-IH transducer is ideal for bass boats that want to install the transducer inside a fiberglass hull and not on the transom where cavitation could cause issues. It requires a flat section (<6°) in the hull to be mounted and is excellent for boats traveling at high speeds that want to maintain accurate depth readings.The 8-pin transducer features high-wide CHIRP ...
Related products
- Garmin
Garmin gWind Wireless 2 Transducer
The gWind Wireless 2 transducer offers an easy-to-install solution that eliminates running wires through masts up to 15 m (50 ft.). Accurate wind signals are sent via an ANT connection directly to a GNX Wind instrument or compatible Garmin GPSMAP 8400 series or GPSMAP 7400 series chartplotters.
- GarminFishfinder / Sonar
Garmin Striker 4 Fishfinder & Dual-Beam Transducer
The rugged STRIKER series is designed to not only see fish and structure below the boat, but also to mark your favourite fishing spots and easily navigate back to them. With GPS on board, you also have access to accurate speed over the ground (SOG) data. Raising the standard for fishfinder performance and ease-of-use, the STRIKER series is a powerful …
- Garmin
Garmin 12 Pin Transducer to Dual 4 Pin Y-Cable
Use this adapter cable when connecting a compatible 12-pin transducer to a compatible 4-pin Garmin device.
- Garmin
Garmin GPSMAP 78
For boaters and watersports enthusiasts who want to run with the best, the rugged GPSMAP 78 features crisp colour mapping, high-sensitivity receiver, new moulded rubber side grips, plus a microSD card slot for loading additional maps. GPSMAP 78 comes with built-in worldwide basemap, so you can navigate anywhere with ease. And, like the rest of the 78-series, the 78 is …
