Description
- Depth & Temperature.
- 50/200 kHz.
- 600 W RMS.
- High-Performance.
- Stainless Steel.
Airmar SS505 Transducer Thru Hull Depth only stainless housing
£344.00
The SS505 is a compact, impact resistant, stainless steel stem for use on all hulls. The dual-frequency version provides good target detail in shallow-water at 200 kHz and good deep-water bottom tracking at 50 kHz. The narrow-beam 200 kHz version provides excellent bottom detail. Airmar’s High-Performance Fairings are recommended for all installations to obtain the best possible performance.
Out of stock
Additional information
| Weight | 0.000000 kg |
|---|
You may also like…
Airmar
Airmar SS510 DT 200Khz Echo Range Sensor 20m
Airmar 44-186-2-01 SS510 DT 200kHz EchoRange Stainless Steel Smart Sonar
Airmar’s commitment to innovative technology has produced the SS510. This broadband 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow-water with high resolution. This transducer can also be “chirped” with a long pulse over a wide-frequency band. Users …
-
Airmar
Airmar SS60 50/200A Thru Hull DST 20 Tilt 2M cable 5 Pin Mix/Match
Airmar 31-704-1-01 SS60 50/200 DST 20′ Tilt Thru Hull Transducer with 5 Pin Female Connector
20′ Tilted version for 16′ to 24′ hull deadrise
The SS60 is a 600 W, 50/200 kHz transducer which integrates Airmar’s popular tilted element feature. Tilted element transducers have the ceramic element fixed at either a 20°, 12° or 0° angle within the transducer …
-
Airmar
Airmar SS164 DT XDI 50/200 0 Deg 2m Cable 9pin Male M&M
Airmar 41-498-1-01 SS164 50/200 1KW Transducer with Humminbird 9 pin connector
0′ version for 0′ – 7′ hull deadrise
Step up to a 1 kW—without a fairing! Airmar’s innovative Tilted Element™ technology to a higher power. The 1 kW, flush-mount, tilted element transducer is perfect for fast, trailered, tournament sportfishing vessels that cannot accomodate a high-performance fairing. The flush-mounted, stainless …
-
Airmar
Airmar SS60 0 50/200kHz 2m Cable
The SS60 is the stainless-steel version of our popular, B60, Tilted Element™ transducer. This product provides a vertical beam without a fairing. Inside the housing, the ceramic element is tilted for built-in deadrise compensation. The resulting vertical beam returns crisp echoes for more-accurate depth readings.
Related products
-
Airmar
Airmar Plastic Hull Nut for 51mm Thru-Hull Transducers
Airmar 04-004 Plastic Hull Nut for 2″ / 51mm through hull transducers.
Fits: ST850, ST650, ST600, ST900, ST950, ST300, ST550, P7, P8, P17, P19, P217, P314, P319, P617V
-
Airmar
Airmar B117 Bronze Depth Thru Hull transducer
Airmar 31-092-6-02 – B117 Depth Tranducer Bronze Through Hul
This bronze thru-hull mount transducer performs well at high speeds. An excellent choice for fibreglass and wood hulls, this 8-pin 600 W narrow stem transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a …
-
Airmar
Airmar 12m B175H 12degree Depth Temperature XIDT 130-210D kHz NC
Airmar 41-535-1-02 B175H 12′ Tilted Thru-Hull DT Transducer with Bare ends cable
12′ tilted version for 16′ to 24′ hull deadrise
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High …
-
Airmar
Airmar DT800 P17 Smart Sensor 235kHz NMEA 0183
Airmar 44-084-1-01 DT800 P17 NMEA 0183 Smart Sensor with bare ends cable
The DT800 utilizes Airmar’s proven Tilted Element™ and broadband technologies in this thru-hull depth and temperature Smart™ Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 o display or network. Airmar’s Smart Sensors have embedded microelectronics—the transducer element and signal …
