£544.57
Airmar 33-632-02 Splitter Kit NMEA 0183 / NMEA 2000
Allows the sensor data to be shown on both NMEA 0183 devices and NMEA 2000® networked instruments simultaneously. For WeatherStation® Instrument, GPS Receiver and Heading Sensor.
Contains: NMEA 0183 and NMEA 2000® cable, 3M connectors, junction box and 6 m (20’) devicenet cable with molded NMEA 2000®male connector.
Out of stock
Airmar 33-632-02 Splitter Kit NMEA 0183 / NMEA 2000
Allows the sensor data to be shown on both NMEA 0183 devices and NMEA 2000® networked instruments simultaneously. For WeatherStation® Instrument, GPS Receiver and Heading Sensor.
Contains: NMEA 0183 and NMEA 2000® cable, 3M connectors, junction box and 6 m (20’) devicenet cable with molded NMEA 2000®male connector.
| Weight | 0.000000 kg |
|---|
Airmar 33-862-03 WX Series Cable 25M NMEA 0183
Mating connector for waterproof sensor connection.
25m cable length.
The Airmar NMEA0183 output cable is compatible with the GH2183 GPS/Heading sensor along with the full line of WX-Series WeatherStations.
Airmar 33-578-02 NMEA 2000 Field connector Micro female.
Field-Attachable Connectors
55mm x 20mm
Airmar 33-565-04 NMEA 2000 Backbone Cable – 6M
Airmar 33-1104-01 10 Meter NMEA 2000 WX Series Cable with 5 Pin Male Connector
Airmar 33-493-01 Thru-Hull Spares Kit for S800 & ST800
Contains all wearing parts in the paddlewheel and blanking plug assemblies.
Contains:
Note: Not the same as the ST600
Airmar 44-854-1-01 220WX WeatherStation Instrument for mobile, land-based, weather-monitoring applications. NMEA 0183 vis RS-232 & NMEA 2000 via CAN.
Airmar 41-200-1-01 SS510 200kHz Broadband Transducer
Airmar’s commitment to innovative technology has produced the SS510. This broadband 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow-water with high resolution. This transducer can also be “chirped” with a long pulse over a wide-frequency band. Users with adjustable-frequency echosounders will …
Airmar 41-535-1-02 B175H 12′ Tilted Thru-Hull DT Transducer with Bare ends cable
12′ tilted version for 16′ to 24′ hull deadrise
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High …