Garmin

This entry level CHIRP solution provides good depth capability and target separation.

This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 16 to 24 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your …

Garmin 010-11938-21 B175L 1kW Chirp Ready Thru-Hull Transducer with 8 Pin Garmin Connector

Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just …

This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14×23 to 3×5 degrees; and a 0 to 26 degree deadrise.

Garmin 010-10183-22 Airmar B744V Bronze Thru Hull Tranducer

The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise. Transducer kit comes …

Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector

20′ Tilted version for 16′-24′ deadrise

Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; …

This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.

Garmin 010-10218-22 Airmar P19 Thru-Hull 200kHz Transducer with Garmin 8 Pin Connector

20′ Tilted verstion for 16′-24′ deadrise

This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 …

This in-hull or pocket mounted transducer uses narrow beams at low/high frequencies to display depth and temperature data to the Garmin Marine Network via a compatible sonar, such as the GSD 26.

Note: In-hull  installation not recommended for cored-hull vessels.

Garmin 010-11868-20 Airmar SS60 600W 50/200 Thru-Hull Transducer With Garmin 8 Pin Connector

0′ Tilt Version for 0-7′ deadrise

This stainless steel 600 W 8-pin transducer provides a vertical beam without a fairing and is excellent for fiberglass and wood hulls. It has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; …

Garmin 010-10717-20 Airmar T80 Water Temperature Probe (8-pin)

Find out the water surface temperature by attaching our 8-pin stainless steel temperature probe to your transducer.

Easily display the current water temperature with our temperature sensor. Simply mount the sensor on your vessel’s transom and connect it to your device. The current water temperature is recorded and displayed on your device.