GarminGarmin 8 Pin Power Cable for EchoMAP 50/70/GPSMAP 527-751
Power and connect your compatible GPSMAP® device with this 8-pin power/data cable. Use with NMEA 0183 devices and a lamp or horn for visible or audible alerts.
-
- Garmin
Garmin 8 Pin Transducer Extension Cable – 30ft (9m)
Garmin 30ft transducer 8 pin extension cable.
- Garmin
Garmin 8 Pin Transducer to 12 Pin Sounder Adapter Cable
Use this adapter cable to connect an 8-pin transducer with XID to a 12-pin sonar port on a compatible marine device.
- Garmin
Garmin 8 Pin Transducer to 4 Pin Sounder Adapter Cable
Connect an 8-pin transducer to a 4-pin sonar port on a compatible marine device with this adapter cable.
-
- Garmin
Garmin 9-Axis NMEA 2000 Heading Sensor
Dimension (LxWxH): 50 x 171 x 88 mm.
Weight: 0.4 lb (180 g).
Default heading output: 10 Hz.
Output heading with +/-2 degree accuracy.
Water rating: IPx7.
LEN = 4.
Operating voltage: 8 VDC to 30 VDC.
- Garmin
Garmin AC Adapter Cable Mini & Micro USB
This kit includes 1 micro cable and 1 mini cable, so you can charge or power your compatible devices. Plug the appropriate cable into your device, then attach the AC outlet adapter for power or connect to a personal computer for data transfer. Includes adapters for the U.K. and Europe.
- GarminVHF Radio
Garmin Active Speaker for VHF 210i/215i/315i
Connect your compatible VHF radio to a handset for onboard communication. The active speaker requires the GHS™ 11 wired VHF handset to adjust volume up or down as needed.
-
- Garmin
Garmin Adapter GPSMAP 12×2 to 12×3 Series
This adapter bezel kit allows you to install a new GPSMAP 12×3 into the existing cutout of a GPSMAP 12×2 Touch, 12×2 Plus, 7412 or 7612 chartplotter in your dash.
- Garmin
Garmin Adapter GPSMAP 7×2 to 7×3 Series
This adapter bezel kit allows you to install a new GPSMAP 7×3 into the existing cutout of a GPSMAP 7×2 or 7×2 Plus chartplotter in your dash.
- Garmin
Garmin Adapter Plate – GPSMAP 9×2 to 9×3 Series
This adapter bezel kit allows instalation of a new GPSMAP 9×3 Series chartplotter into the existing cutout of a GPSMAP 9×2 or 9×2 Plus chartplotter.
- Garmin
Garmin Airmar B117 0′ Tilt 8 Pin Bronze Thru-Hull Transducer
Frequency: 50/200 kHz.
Power: 600 w.
Beam width: 45/12.
- Garmin
Garmin Airmar B150M 0′ Tilt 8 Pin Bronze Thru-Hull Transducer
This entry level CHIRP solution provides good depth capability and target separation.
- Garmin
Garmin Airmar B150M 12′ Tilt 8 Pin Bronze Thru-Hull Transducer
This entry level CHIRP solution provides good depth capability and target separation. This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 8 to 15 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully …
- Garmin
Garmin Airmar B150M 20′ Tilt 8 Pin Bronze Thru-Hull Transducer
This entry level CHIRP solution provides good depth capability and target separation.
This 8-pin 300 W bronze thru-hull mount transducer has a depth of 1,500 ft; an operating frequency of 95-155 kHz; a beamwidth of 26/17 degrees; and a 16 to 24 degree deadrise.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your …
- Garmin
Garmin Airmar B175H 12′ Tilt 8 Pin Bronze Thru-Hull Transducer
Garmin 010-11937-21 B175H Chirp-Ready Thru-Hull Transducer with Garmin 8 Pin Connector
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling …
- Garmin
Garmin Airmar B175H 20′ Tilt 8 Pin Bronze Thru-Hull Transducer
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum …
- Garmin
Garmin Airmar B175L 12′ Tilt 8 Pin Bronze Thru-Hull Transducer
Garmin 010-11938-21 B175L 1kW Chirp Ready Thru-Hull Transducer with 8 Pin Garmin Connector
Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just …
- Garmin
Garmin Airmar B258 8 Pin Bronze Thru-Hull Transducer
This mid-range 1 kW 8-pin transducer with a narrow beam is good for deep water and bottom definition. It has a depth of 1,500 to 2,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 14×23 to 3×5 degrees; and a 0 to 26 degree deadrise.
- Garmin
Garmin Airmar B60 12′ Tilt Bronze Thru-Hull Transducer
Garmin 010-10982-21 Airmar B60 Bronze 50/200 Thru-Hull Transducer With Garmin 8 Pin Connector
12′ Tilted version for 8′-15′ hull deadrise
This entry-level tilted bronze transducer accommodates deadrise angles of 8 to 15 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has a depth of 800 to 1,200 ft; an operating …
- Garmin
Garmin Airmar B619 20′ Tilt 8 Pin Bronze Thru-Hull Transducer
This bronze thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and wood hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 degrees; and a 16 to 24 degree deadrise. Transducer kit comes with installation instructions. Follow the instructions carefully to avoid …
- Garmin
Garmin Airmar B744V 8 Pin Bronze Thru-Hull Transducer
Garmin 010-10183-22 Airmar B744V Bronze Thru Hull Tranducer
The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise. Transducer kit comes …
- Garmin
Garmin Airmar B75H 20′ Tilt 8 Pin Bronze Thru-Hull Transducer
Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector
20′ Tilted version for 16′-24′ deadrise
Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; …
- Garmin
Garmin Airmar DT800 20′ Tilt NMEA 2000 Thru-Hull Transducer
Garmin 010-11105-00 Airmar DT800 Smart Sensor 20 Degree
20′ Tilted version for 16′ – 24′ hull deadrise
The DT800 utilizes Airmar’s proven Tilted Element™ and broadband technologies in this thru-hull depth and temperature Smart™ Sensor. The DT800 is a low-profile, retractable, thru-hull sensor that computes accurate depth and temperature data and sends it to any NMEA 0183 or NMEA2000® …
- Garmin
Garmin Airmar P19 12′ Tilt 8 Pin Thru-Hull Transducer
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls.
- Garmin
Garmin Airmar P19 20′ Tilt 8 Pin Thru-Hull Transducer
Garmin 010-10218-22 Airmar P19 Thru-Hull 200kHz Transducer with Garmin 8 Pin Connector
20′ Tilted verstion for 16′-24′ deadrise
This plastic thru-hull mount transducer performs well at high speeds and is an excellent choice for fiberglass and metal hulls. This 8-pin 500 W transducer has a depth of 900 ft; an operating frequency of 77/200 kHz; a beamwidth of 45/15 …
Standard Shipping
Showing 729–756 of 3140 results
“Garmin 8 Pin Transducer Extension Cable – 30ft (9m)” has been added to your basket. View basket
