Showing 3109–3136 of 3140 results

  • Victron

    Victron Skylla-TG 24/30 (1+1)

    Features include: Temperature sensor, use as a power supply, forced cooling.

    Charge voltage ‘absorption’ / ‘float’: 28.5 V DC / 26.5 V DC.

    Battery capacity: 150-500 Ah.

    Protection: IP21 / Output short circuit, battery reverse polarity detection, battery voltage too high, temperature too high.

    Charge current starter batt. / house batt.: 4 …

  • Victron

    Victron Skylla-TG 24/30 GMDSS 120-240V

    Features include: Temperature sensor, use as a power supply, forced cooling.

    Remotely control and monitor the extensive features of your SmartSolar MPPT charger with built-in bluetooth by pairing it with your smartphone or other device via VictronConnect. If your installation is connected to the internet Victron Remote Management Portal (VRM) provides access to the full power of your MPPT, …

  • Victron

    Victron Skylla-TG 24/50 (1+1)

    The Skylla-TG battery charger is a fully automatic charger for 24V batteries and accepts any mains supply that delivers 90-265 V AC, with frequencies ranging from 45 to 65 Hz. The Skylla-TG also accepts DC supply, ranging from 90 up to 400 V DC. It charges the battery according to the IUoUo characteristic, which is a 3-stage charging characteristic. While …

  • Victron

    Victron Skylla-TG 24/50 (1+1) 120-240V

    Features include: Temperature sensor, use as a power supply, forced cooling.

    Input voltage / input voltage range: 230 V AC / 90 – 265 V AC.

    Frequency: 45-65 Hz / Power factor: 1.

    Charge voltage ‘absorption’ / ‘float’: 28.5 V DC / 26.5 V DC.

    Battery capacity: 250-500 Ah.

    Protection: IP21 / Output short circuit, …

  • Victron

    Victron Skylla-TG 24/50 GMDSS 120/240V Battery charger

    Features include: Temperature sensor, use as a power supply, forced cooling.

    Input voltage / input voltage range: 230 V AC / 90 – 265 V AC.

    Frequency: 45-65 Hz / Power factor: 1.

    Charge voltage ‘absorption’ / ‘float’: 28.5 V DC / 26.5 V DC.

    Charge current: 50 A.

    Charge characteristic: IUoUo (three step).

  • Victron

    Victron Skylla-TG 24/80(1+1) 230V Charger

    One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ.

  • Victron

    Victron Skylla-TG 24v/30a(90-265vac)

    Dimensions (mm) 14.4 x 9.9 x 5.8.

    Voltage 24V.

    Weight (kgs) 12.1.

    IP Rating IP21.

  • Victron

    Victron Skylla-TG 24v/50a(1+1) 3 Phase 400v Charger

    One full rated output and one 4 Amp output. Charge voltage can be precisely adjusted to suit any battery system. The input for the charger is 230V at 50/60HZ.

  • Victron

    Victron Skylla-TG Battery Charger 24/100A

    Dimensions (mm) 14.4 x 9.9 x 10.1.

    Voltage 24V.

    Weight (kgs) 20.

    IP Rating IP21.

  • Victron

    Victron SmartShunt 500A / 50mV

    The SmartShunt is an all in one battery monitor, only without a display. Your phone acts as the display. The SmartShunt connects via Bluetooth to the VictronConnect App on your phone (or tablet) and you can conveniently read out all monitored battery parameters, like state of charge, time to go, historical information and much more.

  • Victron

    Victron Smartsolar MPPT 100/15

    A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

  • Victron

    Victron Smartsolar MPPT 100/20

    A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

  • Victron

    Victron Smartsolar MPPT 100/30

    A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

  • Victron

    Victron SmartSolar MPPT 100/50

    A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, SmartSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. SmartSolar maintains battery health, extending its life.

  • Victron

    Victron SmartSolar MPPT 150/100-Tr VE.Can

    The MPPT VE.Can SmartSolar charger uses the latest and fastest technology to convert energy from a solar array into energy that optimally charges a battery banks.

  • Victron

    Victron Smartsolar MPPT 75/10 Retail

    A solar charger gathers energy from your solar panels, and stores it in your batteries. Using the latest, fastest technology, BlueSolar maximises this energy-harvest, driving it intelligently to achieve full charge in the shortest possible time. BlueSolar maintains battery health, extending its life.

  • Victron

    Victron SmartSolar MPPT 75/15

    MPPT: Ultra Fast Maximum Power Point Tracking By constantly monitoring the voltage and current output of your solar (PV) panels, MPPT technology ensures that every drop of available power is rinsed out of your panels, and harvested for storage. The advantage of this is most noticeable when the sky is partially clouded, and light intensity is constantly changing.

  • Victron

    Victron Solar Cable 5m

    5m solar cable 4mm² DC Solar Cable with MC4-M/F Connectors – Black.

  • Victron

    Victron Temperature sensor for BMV-702 and 712

    Temperature sensor for BMV-702 or BMV-712 battery monitor. This product will only work with a BMV-702 or BMV-712 battery monitor. 

  • Victron

    Victron VE Transfer Switch 10KVA, 1ph, 200-250Vac

    The VE Transfer Switch has been designed to switch sensitive loads, such as computers or modern entertainment equipmentfrom one AC source to another. The priority source typically is the mains, a generator or shore power.

  • Victron

    Victron VE.Bus to NMEA2000 Interface

    This NMEA2000 drop cable connects a VE.Bus product, for example a Multi or Quattro, to a NMEA2000 network. It transmits monitoring information, AC voltages and currents, DC voltages and currents and the state. Other NMEA2000 devices can also send commands to the VE.Bus product to turn it on or off, or change the input current limit. 

  • Victron

    Victron VE.CAN NMEA 2000 Cable

    Use this cable to connect a Victron product with a VE.Can port to a NMEA2000 network.

  • Victron

    Victron VE.Direct Bluetooth Smart Dongle

    Using the VE.Direct to Bluetooth Smart dongle you can display your BMV or MPPT information on iOS and Android devices, using the VictronConnect app. View information wirelessly such as battery status and solar panel power, plus other useful data. 

  • Victron

    Victron VE.Direct Cable 0.9m

    ASS030530209: Victron Ve Direct Cable 0.9M

    The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.

  • Victron

    Victron VE.Direct Cable 1.8m

    ASS030530218: Victron Ve Direct Cable 1.8M

    The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.

  • Victron

    Victron VE.Direct Cable 10m

    ASS030530310: Victron Ve Direct Cable 10M

    The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.

  • Victron

    Victron VE.Direct Cable 3m

    ASS030530230: Victron Ve Direct Cable 3M

    The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.

  • Victron

    Victron VE.Direct Cable 5m

    ASS030530250: Victron Ve Direct Cable 5M

    The VE.Direct cable used for comunication between Victron VE.Direct devices, it can also used to connect a Victron battery monitor to the Victron Colour Control.