Description
Pressure Transducer 0 to 10 PSI, or tank depth up to 276″ of water (7.0m) for Maretron FPM100 fluid pressure monitor.
Maretron Pressure Transducer 0 to 10 PSI (FPM100)
£147.60
Pressure Transducer 0 to 10 PSI, or tank depth up to 276″ of water (7.0m) for Maretron FPM100 fluid pressure monitor.
Out of stock
Related products
MaretronMaretron Temperature Module
Six External Temperature Probes are Measured and Broadcast Over NMEA 2000 Network.
Four Channels for Thermistor Probes and 2 Channels for High Temperature Thermocouple Probes.
Wide Variety of Applications Supported with Optional Temperature Probes.
- Maretron
Maretron Tank Level Monitor 104”Depth Tanks
Maretron’s TLM200 is used to sense fluid levels of tanks using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM200 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no difficult …
- Maretron
Maretron Mini Termination Resistor Female
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection .
Termination resistors are used to terminate both ends of the trunk line.
- Maretron
Maretron Solid-State Rate/Gyro Compass
Maretron’s SSC300, implementing the second generation of Maretron’s award-wining compass technology, is a solid state, rate gyro electronic compass that provides better than 0.7° heading accuracy through ±45° of roll and pitch angle, and better than 1° roll and pitch accuracy in static conditions.
