Description
Battery Voltage.
Battery Current.
Ripple Voltage.
Battery Case Temperature.
State of Charge.
Time Remaining.
Charge Efficiency Factor.
Includes LEMHTA200-S, TR3K and 2 x FC01
Maretron Direct Current Monitor
£493.80
DCM100 Direct Current Monitor.
Maretron’s DCM100 Monitor is an advanced electronic monitoring device used to measure the voltage and current of any direct current (DC) power source or load. Examples of DC power sources that can be monitored with the DCM100 include batteries, alternators, solar panels, and wind generators. The DCM100 can also be used to monitor DC loads like inverters, windlasses, DC refrigerators, or any DC branch circuit. When the DCM100 is used to monitor batteries, sophisticated circuitry and software algorithms monitor battery temperature, load current, charging current and terminal voltage to precisely compute battery state of charge, and time remaining.
To measure current, the DCM100 uses an included state-of-the-art Hall effect current sensor which simply slips over the wire – you don’t have to break connections or install connectors as you do with inline shunts used by other solutions. Best of all, the DCM100 is NMEA 2000 certified so you can view any and all DC information anywhere on the vessel using a compatible NMEA 2000 display.
The DCM100 is a key component of Maretron’s N2KView vessel monitoring and control system.
4 in stock
You may also like…
MaretronMaretron Alternating Current Monitor includes M000630
NMEA 2000® Interface.
Waterproof Connectors.
Sealed Waterproof Enclosure.
Opto-Isolated from NMEA 2000® Eliminating Potential Ground Loops.
Monitoring of busses carrying AC power and transmitting: Voltage & Frequency.
Monitoring AC Power Sources such as Utilities and Generators and transmitting: Voltage, Current, Frequency, Real Power, Reactive Power, Apparent Power, Power Factor, Total Energy Imported & Exported.
- Maretron
Maretron Vessel Monitoring and Control Black Box
9-36 Volt Power Supply.
Solid State Disk Drive.
Fanless Cooling System.
Dual CAN Bus for Single or Redundant NMEA 2000® Network Connections.
Four USB Ports for Touchscreen, Keyboard, Mouse, Trackball, or Thumb Drive Connections.
VGA or HDMI Video Connection (2560 x 1600 Maximum Resolution).
Ethernet Connector for IP Camera Input or Email Alert Notification.
- Maretron
Maretron Tank Level Monitor 40”Depth Tanks
Maretron’s TLM100 is used to sense fluid levels of tanks by using ultrasonic technology. Ultrasonic, or sound waves, are transmitted via the TLM100 mounted at the top of the tank and the flight times of the sound waves to and from the fluid are measured much like a depth sensor. What this means for you is that there are no …
- Maretron
Maretron Vessel Monitoring and Control Software for PC NMEA 2000
Whether you are interested in monitoring your vessel’s systems while underway or remotely from your home or office, Maretron’s N2KView software displays the information you need including engines, generators, tanks, rudders, navigation instruments, local weather, and much, much more. N2KView® is completely user-configurable and you are free to create different screens for your exact needs while easily switching from screen …
Related products
- Maretron
Maretron Mini Termination Resistor Female
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection .
Termination resistors are used to terminate both ends of the trunk line.
-
- Maretron
Maretron SAE 5-Bolt Pattern Focus Tube with Dead Band Eliminator
Focus tubes allow the TLM100/TLM150 ultrasonic tank level monitors to be used for level measurement on vessels with non-displacement hulls at up to 15° of pitch or roll, compared to 6° pitch or roll for the sensor alone. Additionally, the focus tube with deadband eliminator raises the TLM100/TLM150 2″ above the top of the tank, allowing accurate level measurement with …
- Maretron
Maretron Mini Termination Resistor Male
Diagnostic versions indicate correct polarity at a glance to ensure power connections have been made properly.
Screw connector for positive connection .
Termination resistors are used to terminate both ends of the trunk line.
