Garmin B75M 20′ Tilt 8 Pin Bronze Thru-Hull Transducer

£979.99

A 600 W transducer with 8 pins, it has a depth of 900 ft; an operating frequency of 80-130 kHz; a beamwidth of 24/16 degrees; and a 16 to 24 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Out of stock

SKU: 230-0101163622 Category:

Description

  • Cable length: 39 ft
  • Depth/speed/temperature: Depth and Temperature
  • Power: 600 W
  • Frequency: CHIRP (80-130 kHz)
  • Supported deadrise/transom angles: 16°-24° degree deadrise
  • Maximum depth: 900 ft.
  • Number of pins: 8-pin
  • Beamwidth: 24°/16°

This bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar like the GSD™ 26.

A 600 W transducer with 8 pins, it has a depth of 900 ft; an operating frequency of 80-130 kHz; a beamwidth of 24/16 degrees; and a 16 to 24 degree deadrise.

Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.

Additional information

Weight0.000000 kg

You may also like…

  • Garmin

    Garmin Airmar B175H 12′ Tilt 8 Pin Bronze Thru-Hull Transducer

    Garmin 010-11937-21 B175H Chirp-Ready Thru-Hull Transducer with Garmin 8 Pin Connector

    Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The High frequency band delivers a narrow beamwidth, excellent for pinpointing fish holding tight to wrecks, reefs and other structures. High frequency also delivers amazing target separation on baitfish and schooling …

  • Garmin

    Garmin Airmar B175L 12′ Tilt 8 Pin Bronze Thru-Hull Transducer

    Garmin 010-11938-21 B175L 1kW Chirp Ready Thru-Hull Transducer with 8 Pin Garmin Connector

    Airmar’s low profile Chirp-ready transducer models are the perfect addition to smaller boats such as center consoles. The low frequency band is the deep water performer delivering excellent coverage and tracking in deeper depths. The B175L transducer delivers up to 20 kHz of total bandwidth in just …

  • Garmin

    Garmin B175M 20′ Tilt 8 Pin Bronze Thru-Hull Transducer

    Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum flexibility for the choice …

  • Garmin

    Garmin Airmar B75H 20′ Tilt 8 Pin Bronze Thru-Hull Transducer

    Garmin 010-11634-22 Airmar B75H Bronze Thru-Hull Transducer with Garmin 8 Pin Connector

    20′ Tilted version for 16′-24′ deadrise

    Our bronze thru-hull mount transducer is designed to allow both traditional and spread spectrum scanning when used with a compatible sonar. A 600 W transducer with 8 pins, it has a depth of 800 ft; an operating frequency of 130-210 kHz; …