Description
- Frequency: 50/200 kHz
- Power: 600 W
- Beamwidth: 45°/12°
- Maximum Depth: 800-1,200 ft.
- Depth and Temperature
- 8-pin Garmin Connector
- 33 ft Cable
- For 16°-24° degree deadrise
Garmin/Airmar B60 Bronze Thru-Hull Transducer 20 Degrees Tilt
£289.99
Garmin 010-10982-20 Airmar B60 Bronze Thru-Hull 50/200kHz transducer with Garmin 8 pin Connector
20′ Tilted version for 16-24′ deadrise
This entry-level tilted bronze transducer accommodates deadrise angles of 16 to 24 degrees without a fairing. An excellent choice for fiberglass and wood hulls, this 600 W 8-pin transducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; and a beamwidth of 45 to 12 degrees.
Transducer kit comes with installation instructions. Follow the instructions carefully to avoid damaging your boat.
Out of stock
Additional information
| Weight | 1.590000 kg |
|---|---|
| Dimensions | 10 × 8 × 4 cm |
You may also like…
GarminGarmin Airmar B175H 20′ Tilt 8 Pin Bronze Thru-Hull Transducer
Step up to 1 kW without a fairing with this flush-mounted bronze housing that protrudes less than 1/4-inch outside the hull and can sit on the trailer rollers/bunks without damage. The tilted element inside the transducer accommodates all hull deadrises and eliminates the need for a fairing block. And, low, medium and high frequency versions provide maximum …
- Garmin
Garmin Airmar B744V 8 Pin Bronze Thru-Hull Transducer
Garmin 010-10183-22 Airmar B744V Bronze Thru Hull Tranducer
The only thru-hull transducer that offers depth, speed and temperature in one package, this 8-pin 600 W triducer has a depth of 800 to 1,200 ft; an operating frequency of 50 to 200 kHz; a beamwidth of 45 to 12 degrees; and a 0 to 24 degree deadrise. Transducer kit comes …
- Garmin
Garmin Airmar B117 0′ Tilt 8 Pin Bronze Thru-Hull Transducer
Frequency: 50/200 kHz.
Power: 600 w.
Beam width: 45/12.
- Garmin
Garmin Airmar P79 8 Pin Adjustable Angle In-Hull Transducer
Depth: 800 – 1,200 ft.
Operating frequency: 50 – 200 KHz.
Beamwidth: 45 – 12 degrees.
Deadrise: 0 – 22 degree.
Not recommended for cored hulls.
Related products
- Airmar
Airmar P7 200BB Thru Hull Transducer D 600W 9M C2 3pin Female ISO
Airmar P7 600W 200BB Shorty Depth Transducer with 3 Pin Female Connector for Autohelm/Raymarine ST40 Instruments
The plastic P7 and P207 are part of our Shorty Series, designed for boats with limited headroom. Compared with the P19, the P7 stem is 28 mm (1.10″) shorter for mounting in tight spots. The low-profile P7 model is nearly flush and minimizes drag …
- Airmar
Airmar SS510 D 200BL Broadband Transducer
Airmar 41-200-1-01 SS510 200kHz Broadband Transducer
Airmar’s commitment to innovative technology has produced the SS510. This broadband 200 kHz transducer has a Q of 2 and very good sensitivity. It enables users to perform accurate surveys in shallow-water with high resolution. This transducer can also be “chirped” with a long pulse over a wide-frequency band. Users with adjustable-frequency echosounders will …
- Airmar
Airmar M192 33B 200H 15M C44 NC Transducer
Airmar 41-070-1-01 M192 33kHz Transducer
The M192 features a ceramic-element array with a narrow beamwidth and exceptional sensitivity to provide excellent bottom detail.
Applications
- Deep and shallow-water survey
- High seas navigation
15M Bare ends cable
- Airmar
Airmar Plastic Hull Nut for 51mm Thru-Hull Transducers
Airmar 04-004 Plastic Hull Nut for 2″ / 51mm through hull transducers.
Fits: ST850, ST650, ST600, ST900, ST950, ST300, ST550, P7, P8, P17, P19, P217, P314, P319, P617V
