Description
Airmar 20-264-01 Install Kit for P79 Tranducers
Includes
- P79 Flange Base
- O-Ring
- Locking Ring with Angle indicator
Airmar Install Kit for P79 Incl O Ring Blanking Plug & Housing
£55.79
Airmar 20-264-01 Install Kit for P79 Tranducers
Includes
- P79 Flange Base
- O-Ring
- Locking Ring with Angle indicator
1 in stock
Additional information
| Weight | 0.300000 kg |
|---|---|
| Dimensions | 15 × 13 × 8 cm |
You may also like…
Airmar
Airmar P79 50/200A In Hull D 600W 10M 7 Pin Raymarine Series C E
Airmar 31-234-2-02 P79 50/200 Depth Transducer with Raymarine C/E Series Connector
Airmar P79 in-hull transducer easily adjusts to hull deadrise angles up to 22 º. This ensures that the beam is vertically oriented to receive echoes, resulting in accurate depth readings. Unlike traditional “puck” type transducers, our P79 consists of a base that is bonded to the hull and filled …
Related products
-
Airmar
Airmar DX 900+ Depth / Speed / Temp Smart Sensor NMEA 2000
Airmar 44-216-1-03 DX900+ Speed/Depth/Temp Smart Sensor NMEA 2000
No matter what type of racing you do, it’s important to get every ounce of speed out of your boat. AIRMAR’s new dual axis, electromagnetic multifunction sensor is exactly the advantage you need. The DX900+ measures transverse and longitudinal speed which instantaneously calculates leeway angle and speed through water with no latency.
-
Airmar
Airmar B45 50/200 Thru Hull Transducer 10M 10 Pin Female Furuno
Airmar 31-272-2-02 B45 50/200 Thru Hull Transducer with Furuno 10 Pin Female Connector
The B45 is our smallest and most economical, dual-frequency, bronze, stem transducer. The included fairing block streamlines the transducer and increases the performance of the transducer even at higher speeds.
-
Airmar
Airmar 120WX WeatherSation Instrument
Airmar 44-858-1-01 120WX Weather Station Instrument for recreational boating. NMEA 0183 via RS-232 & NMEA 2000 via CAN
-
Airmar
Airmar Blanking Plug for DST800 transducer
Airmar 33-486-01 Blanking Plug for DST800 Transducers
A blanking plug is designed to be used in a transducer housing when the active insert has been removed for storage or cleaning. Sides inset from bottom about 15mm above bottom, this allows the Integrated-Valve space.
