Description
RJ45 to RJ45 Power over Ethernet Cable for Raymarine T-Series PoE/JCU
£85.00
RJ45 to RJ45 Power over Ethernet Cable for Raymarine T-Series PoE/JCU
Out of stock
RJ45 to RJ45 Power over Ethernet Cable for Raymarine T-Series PoE/JCU
Weight | 0.300000 kg |
---|---|
Dimensions | 23 × 18 × 2 cm |
Depth trend indicator.
Minimum and maximum depth.
Audible shallow, anchor and deep water alarms.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Depth only transducer.
Compatible hull material: aluminium and fiberglass.
Cable 9m (30ft) cable with connector.
Hole diameter for installation: 2″.
Speed Through Water or Speed Over Ground (GPS required).
Sea surface temperature.
Trip and Log data.
Large numerals and digits.
Red back lighting for enhanced night time visibility.
SeaTalk and SeaTalkNG interfaces.
NMEA 2000 (compatible) interface.
Built-in transducer interface.
110mm x 115mm footprint.
Low power consumption.
Crystal clear depth readout.
Shallow and deep anchor alarms.
Minimum depth display.
Red backlighting for improved visibility.
Large controls for ease of use at sea.
Low power consumption for increased battery life.
SeaTalk interface (SeaTalkNG when used with SeaTalk converter).
Built-in transducer interface.
Same footprint as the older Raymarine ST40 instrumentation.
…